Installing A New Rail-And-Post Fence? Avoid Making These 3 Mistakes

Blog

If you are on a budget and need to install a fence, you may be tempted to do the job yourself instead of hiring a fencing contractor. While it's possible to pull it off without any problems, it is also possible that you'll make some mistakes that will cause your new fence to not look so great. When installing a rail-and-post style fence, be sure to avoid making these 3 mistakes.

Not Properly Identifying Your Property Line

When you don't have an existing fence that you are replacing, care must be taken to ensure that you are building your fence on your property. You should never assume where the property line is based on you or your neighbor's assumptions. You could end up causing a problem years from now when you go to sell your house and an official property survey is done. If your fence is on your neighbor's property, you could be forced to take it down or purchase the portion of property that your fence is on.

Since you'll be making a large investment by installing a new fence, it is a good idea to get a land surveyor to come out to your home and identify where a fence can be installed. It is the only way to be positive your fence is built on your property.

Not Using Cement Anchors

Installing your fence posts involves a lot more work than simply digging the holes and pounding the posts in. Each fence post should be anchored into gravel and concrete.

Start by making a hole that is larger than the fence post. You'll then need to pour gravel along the bottom of the hole to form a base. Place the fence post in the hole, and use braces to support it upright. Then pour in the concrete, and wait for it to completely cure. This could take a couple days to do.

Not using concrete could cause the fence to fall down or become slanted after it faces high winds.

Not Using The Correct Lumber

When it comes to fence posts, you cannot use any lumber from your local home improvement store. Woods like pine or untreated oak are porous and soft, and will rot after being in contact with the moist soil for a couple years. Instead, go with a wood that will naturally resist rot, like cedar. Lumber that has been pressure treated works great as well.

Cheaper wood can be used for your fence's rails, because they will not be touching the ground.

If you don't feel confident that you can install the fence properly, have a fencing contractor. like http://www.phoenixfence.com, do it for you.

Share

25 March 2016

Perk Up Your Patio

When I host outdoor parties, I set up chairs and tables outside on my concrete patio. It’s very convenient. Guests don’t need to get their shoes dirty and they can come in and out as they please. I always get lots of compliments on my beautiful stamped concrete patio – it’s designed to look like brick instead of concrete, and it’s very convincing. If you’d like to learn more about how you can use concrete and stamped concrete to create beautiful additions to your home, this blog is written for you. Let me how you can save money by using stamped concrete instead of brick or stone, and how you can improve the value of your home by adding a concrete patio or deck.